SN74HC164PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 36MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Number of Outputs | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 160μA |
| Number of Bits | 8 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Ambient Temperature Range High | 125°C |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC164PWR Overview
14-TSSOP (0.173, 4.40mm Width) is a package containing the embedded device. 14 is the total number of terminations on the chip. Cut Tape (CT) is the case in which it is packed. 5V is the operating supply voltage of the part. There are 1 elements on this part. There are 14 pins on the device. As a general recommendation, mounting by Surface Mount is recommended. This electronic component is classified as HC/UH. Its mounting method is Surface Mount. -40°C~125°C is the operating temperature range. Votage within the range of 2V~6V is supplied. 74HC is the series number of this electrical component. Similar parts can be found by searching for the 74HC164 family. In terms of supply voltage, this chip operates within the range of 5V. The following additional aspects of this section are worth noting: AND-GATED SERIAL INPUTS (A AND B). There must be a minimum supply voltage (Vsup) of 2V for this part. There are 2 input lines available in the device. It should not exceed 6V in terms of the supply voltage (Vsup). The total number of IC chip bits is 8. TR is used to package the part. 36MHz is the frequency of the device. 8 outputs are provided by the part.
SN74HC164PWR Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Operate supply voltage at 5V
Packing Method : TR
SN74HC164PWR Applications
There are a lot of Texas Instruments SN74HC164PWR Shift Registers applications.
- Serial-to-parallel data conversion
- Pulse Extenders
- Pattern Recognizers
- Output expansion
- Parallel data
- data transfer
- data manipulation
- 7-segment display control
- Data manipulation
- Remote control holding register