SN74HC164PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 255 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 5000000Hz |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC164PWG4 Overview
In package TSSOP, there is an embedded device. This chip has a total termination count of 14. Its operating supply voltage is rated at 5V. The part consists of 1 elements. Devices with 14 pins are available. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. As noted, this chip operates within the range of 5V. A device with 2 input lines is available. 14 pins are on it. At temperatures below 125°C, it is recommended for use. Operation of this device requires a value greater than -40°C. We use this supply voltage under 6V. This supply voltage is employed higher than 2V.
SN74HC164PWG4 Features
With 14 pins
Operate supply voltage at 5V
SN74HC164PWG4 Applications
There are a lot of Texas Instruments SN74HC164PWG4 Shift Registers applications.
- Serial to parallel converter
- 8-bit data storage
- Cache memory in CPU
- Sequence generator
- Interconnectors
- Delay Line
- Data manipulation
- Flash Memory
- Remote control holding register
- data manipulation