SN74HC164PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 59.987591mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC164PWE4 Overview
There is a TSSOP package embedded with the device. Taking the total number of terminations on the chip and adding them up, we get 14. A Rail/Tube case is used to pack it. There is 5V operating supply voltage listed on the part. 1 elements are present in this part. The device is equipped with 14 pins. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additionally, this section contains the following: AND-GATED SERIAL INPUTS (A AND B). The device has a total of 2 input lines. This board has 14 pins in total. Using it below 85°C is recommended. Ideally, it should not fall below -40°C. Under 6V, this supply voltage is employed. This supply voltage is employed higher than 2V.
SN74HC164PWE4 Features
With 14 pins
Operate supply voltage at 5V
SN74HC164PWE4 Applications
There are a lot of Texas Instruments SN74HC164PWE4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- data transfer
- Serial to parallel converter
- ROM Chips
- 7-segment display control
- Remote control holding register
- Pulse Extenders
- 8-bit data storage
- Data Processors
- Counter