SN74HC164PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 28MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 255 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Input Current | 1μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC164PW Overview
The device is embedded in 14-TSSOP (0.173, 4.40mm Width) package. It sums up to 14 where the chip's terminations add up. The Tube case contains it. A voltage of 5V is specified for the part's operating supply. The part consists of 1 elements. 14 pins are located on the device. The mounting method should be Surface Mount. Electronic components fall under the category of HC/UH. In Surface Mount, this component is mounted. It is important to note that the operating temperature range is -40°C~125°C. There is a votage of 2V~6V provided with it. 74HC is the series number of this electrical component. Similar parts can be found using the 74HC164 family. This chip's operating supply voltage is reported as 5V. Additional aspects of this section are as follows: AND-GATED SERIAL INPUTS (A AND B). It is recommended that this part's supply voltage (Vsup) must not be less than 2V. 2 input lines are available on the device. Vsup cannot exceed 6V for this part. 28MHz is the frequency of the device.
SN74HC164PW Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Operate supply voltage at 5V
SN74HC164PW Applications
There are a lot of Texas Instruments SN74HC164PW Shift Registers applications.
- Cache memory in CPU
- Interconnectors
- data transfer
- Data Processors
- Data manipulation
- Pseudo Random Pattern Generator
- 8-bit data storage
- Flash Memory
- Output expansion
- LED matrix control