SN74HC164N
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 62MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Load Capacitance | 50pF |
| Propagation Delay | 255 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Input Current | 1μA |
| Min Supply Voltage (DC) | 2V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC164N Overview
There is a 14-DIP (0.300, 7.62mm) package embedded with the device. 14 is the total number of terminations on the chip. It is packed in a case number Tube. The part operates at 5V voltage. There are 1 elements on this part. 14 pins are provided on the device. It is recommended to mount by Through Hole in order to get the best results. It is a component of the HC/UH. There is a component mounted in the way of Through Hole on this board. -40°C~125°C is the range of operating temperatures for the device. Votage within the range of 2V~6V is supplied. In this case, the electrical component belongs to the series 74HC. If you use the 74HC164 family, you can find parts that are similar. The operating supply voltage of this chip is noted to be within the range 5V. Taking note of the following additional details: AND-GATED SERIAL INPUTS (A AND B). In the device, there are 2 input lines that are available for use. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. Its frequency is set to 62MHz.
SN74HC164N Features
With 14 pins
Mounted in Through Hole type.
Based on 74HC164 family
Operate supply voltage at 5V
SN74HC164N Applications
There are a lot of Texas Instruments SN74HC164N Shift Registers applications.
- Counter
- Remote control holding register
- temporary data storage
- Serial-to-parallel data conversion
- Flash Memory
- Pattern Recognizers
- ROM Chips
- Serial to parallel converter
- Dual-rank shift, hold, and bus applications
- Data Format Converters