SN74HC164DTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 5000000Hz |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC164DTG4 Overview
Embedded in a package of type SOIC, the device is available for use. It sums up to 14 where the chip's terminations add up. There is a Tape & Reel (TR) case containing it. There is 5V operating supply voltage listed on the part. There are 1 elements on this part. 14 pins are provided on the device. Using Surface Mount as a mount point is recommended. In the HC/UH series, the electronic component belongs. This chip's operating supply voltage is reported as 5V. The following additional aspects of this section are worth noting: AND-GATED SERIAL INPUTS (A AND B). In this device, there are 2 input lines. The total number of pins is 14. Using it below 85°C is recommended. This device should not be operated with a value lower than -40°C. A voltage of 6V is used to supply this voltage. This supply voltage is employed higher than 2V.
SN74HC164DTG4 Features
With 14 pins
Operate supply voltage at 5V
SN74HC164DTG4 Applications
There are a lot of Texas Instruments SN74HC164DTG4 Shift Registers applications.
- Interconnectors
- store data in digital form
- Pulse Extenders
- Output expansion
- Flash Memory
- ROM Chips
- Data Processors
- Dual-rank shift, hold, and bus applications
- Delay Line
- Parallel to serial converter