SN74HC164DTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC164DTE4 Overview
This device can be found embedded within the package SOIC. It sums up to 14 where the chip's terminations add up. This item is packed in case Tape and Reel. There is 5V operating supply voltage listed on the part. There are 1 elements on this part. The device is equipped with 14 pins. The mounting method should be Surface Mount. Electronic components are categorized as HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. This section has the following additional features: AND-GATED SERIAL INPUTS (A AND B). In the device, there are 2 input lines. In total, there are 14 pins on it. It should be used below 85°C. This device should not be operated with a value lower than -40°C. This supply voltage is employed under 6V. Voltages higher than 2V are used for this supply.
SN74HC164DTE4 Features
With 14 pins
Operate supply voltage at 5V
SN74HC164DTE4 Applications
There are a lot of Texas Instruments SN74HC164DTE4 Shift Registers applications.
- Cache memory in CPU
- LED matrix control
- ROM Chips
- Sequence generator
- Data Format Converters
- Serial to parallel converter
- Counter
- Output expansion
- store data in digital form
- temporary data storage