SN74HC164DT
| Parameters | |
|---|---|
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 28MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 80μA |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74HC164DT Overview
14-SOIC (0.154, 3.90mm Width) package contains the device. The number of the chip's terminations sums up to 14. Presented in a case of Tape & Reel (TR). This part has an operating supply voltage of 5V. A total of 1 elements are present on this part. It is equipped with a pin count of 14. Surface Mount is recommended for mounting. There is an electronic component in the HC/UH. Its mounting method is Surface Mount. There is a range of operating temperatures -40°C~125°C. There is a votage of 2V~6V provided with it. 74HC is the series number of this electrical component. A 74HC164 family can be used to search for similar parts. As noted, this chip operates within the range of 5V. This section has the following additional features: AND-GATED SERIAL INPUTS (A AND B). Ensure that Vsup is not less than 2V when powering this part. The device has 2 input lines. This part should not have a supply voltage (Vsup) greater than 6V. TR is the way the part is packaged. 28MHz is the device's frequency.
SN74HC164DT Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Operate supply voltage at 5V
Packing Method : TR
SN74HC164DT Applications
There are a lot of Texas Instruments SN74HC164DT Shift Registers applications.
- data transfer
- Parallel data
- temporary data storage
- Data manipulation
- Output expansion
- Remote control holding register
- Flash Memory
- store data in digital form
- Generate time delay toward digital circuits
- data manipulation