SN74HC164D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 62MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Input Current | 1μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC164D Overview
14-SOIC (0.154, 3.90mm Width) is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 14. The case Tube contains it. 5V is the operating supply voltage of the part. A total of 1 elements are present on this part. In this device, there are 14 pins. It is recommended that the mount should be done by Surface Mount. In the HC/UH series, the electronic component belongs. Surface Mount is the way in which this component is mounted. -40°C~125°C is the operating temperature range. Votage is supplied within 2V~6V. This electrical component belongs to the 74HC series. Based on the 74HC164 family, you can search for similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. Please take note of the following additional aspects of this section: AND-GATED SERIAL INPUTS (A AND B). There should be no voltage less than 2V at the minimum supply voltage (Vsup). The device has 2 input lines. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. 62MHz is the device's frequency.
SN74HC164D Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Operate supply voltage at 5V
SN74HC164D Applications
There are a lot of Texas Instruments SN74HC164D Shift Registers applications.
- Flash Memory
- data manipulation
- 8-bit data storage
- 7-segment display control
- Serial to parallel converter
- data transfer
- Serial-to-parallel data conversion
- LED matrix control
- Parallel to serial converter
- Remote control holding register