SN74F323DW
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 12 ns |
| Power Supply Current-Max (ICC) | 95mA |
| fmax-Min | 70 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
SN74F323DW Overview
SOIC is the package in which the device is embedded. Taking the total number of terminations on the chip and adding them up, we get 20. A voltage of 5V is specified for the part's operating supply. Electronic components are categorized as F/FAST. Taking note of the following additional details: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. It is recommended that this part's supply voltage (Vsup) must not be less than 4.5V. There is a possibility of delivering voltage at 5V. It should not exceed 5.5V in terms of the supply voltage (Vsup). The total number of IC chip bits is 8. It has a total of zero pins. There is a subcategory of it called Shift Registers. The temperature should not exceed 70°C.
SN74F323DW Features
It supplies 5V power
SN74F323DW Applications
There are a lot of Texas Instruments SN74F323DW Shift Registers applications.
- Data manipulation
- data manipulation
- Pattern Recognizers
- data transfer
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- 7-segment display control
- Counter
- temporary data storage
- 8-bit data storage