SN74F299NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F299 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Propagation Delay | 11 ns |
| Family | F/FAST |
| Logic Function | Shift Register |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 70 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F299NSRG4 Overview
This device can be found embedded within the package 20-SOIC (0.209, 5.30mm Width). There are 20 terminations on the chip. The Tape & Reel (TR) case contains it. Voltage rating of the part is 5V. The part consists of 1 elements. 20 pins are located on the device. It is recommended that the mount should be done by Surface Mount. This electronic component is classified as F/FAST. Its mounting method is Surface Mount. It is important to note that the operating temperature range is 0°C~70°C. Voltages within 4.5V~5.5V are supplied to the device. The 74F series represents this electrical component. By using the 74F299 family, you can find similar parts. There must be a minimum supply voltage (Vsup) of 4.5V for this part. A device with 10 input lines is available. A voltage of 5V is possible with this device. Ideally, the maximum supply voltage (Vsup) should not exceed 5.5V.
SN74F299NSRG4 Features
With 20 pins
Mounted in Surface Mount type.
Based on 74F299 family
It supplies 5V power
SN74F299NSRG4 Applications
There are a lot of Texas Instruments SN74F299NSRG4 Shift Registers applications.
- data transfer
- store data in digital form
- Interconnectors
- Data Processors
- Sequence generator
- 8-bit data storage
- Serial-to-parallel data conversion
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Parallel data