SN74F299NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 15 ns |
| Family | F/FAST |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 70 MHz |
| Max Frequency@Nom-Sup | 70000000Hz |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74F299NE4 Overview
The device is embedded in PDIP package. The number of the chip's terminations sums up to 20. A Rail/Tube case is used to pack it. 5V is the operating supply voltage of the part. 20 pins are located on the device. Through Hole is recommended for mounting. Electronic components fall under the category of F/FAST. In terms of supply voltage, this chip operates within the range of 5V. As far as the device is concerned, there are 10 input lines available. It can deliver voltage at 5V. There are 8 bits on the IC chip. 20 pins are on it. A temperature below 70°C is recommended for its use. Ideally, it should not fall below 0°C. A voltage of 5.5V is employed as the supply voltage. It is important to note that this supply voltage is higher than 4.5V. In this device, there are 1 circuits that are active at the same time.
SN74F299NE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74F299NE4 Applications
There are a lot of Texas Instruments SN74F299NE4 Shift Registers applications.
- Output expansion
- 7-segment display control
- Pattern Recognizers
- Serial-to-parallel data conversion
- Data manipulation
- Counter
- store data in digital form
- Pulse Extenders
- Cache memory in CPU
- Sequence generator