SN74F193AN
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Family | F/FAST |
| Logic Function | Counter |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 13 ns |
| Power Supply Current-Max (ICC) | 54mA |
| fmax-Min | 85 MHz |
| Count Direction | BIDIRECTIONAL |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74F193AN Overview
A PDIPpackage is used for this device. In order to configure it, it uses 16terminations. The supply voltage of 5V enables it operate in a fully flexible way. In total, there are 16pins on the component. It emerges as a member of F/FAST family. The device stores 4bits of information. Based on Pbfree code, this may result in no. It is important to note that TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKare really important features of this electronic device. It is manufactured in the temperature grade COMMERCIAL. The voltage source produces a voltage of 5V volts. A voltage of 4.5V is the minimum supply voltage (Vsup). It is possible to reach a maximum supply voltage of 5.5VV (Vsup). In most cases, the maximum operating temperature is set to 70°C.
SN74F193AN Features
Embedded in the PDIP package
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
SN74F193AN Applications
There are a lot of Texas Instruments SN74F193AN Counters & Dividers applications.
- Programmable binary and decade
- Frequency dividing circuits
- Up Counters
- Fixed or Programmable Frequency Division
- Digital multiplexing and demultiplexing
- Control counters
- Divide-by"N" counters/frequency synthesizers
- TRUE RMS-TO-DC CONVERSION
- MULTIPLICATION
- Analog multiplexing and demultiplexing