SN74CBT3306DG4
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
SN74CBT3306DG4 Overview
It is included in the SOIC in order to save board space.Among its basic configurations are 8 terminations.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 8 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.This multiplexer ic has 8 pins configured.This unit is mounted in the way of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer contains 1 bits.mux switch's normal operation requires the power supply of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.2 ports are used for some other peripheral signal switchings to plug in.With a resistance of 7Ohm, it operates.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 4V.It uses IC BUS DRIVER for its logic.
SN74CBT3306DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3306DG4 Applications
There are a lot of Texas Instruments SN74CBT3306DG4 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Used to connect a single source to multiple destinations
- LVDS
- Speed control of medern motors
- Microprocessor instruction decoding
- Enabling block of memory depending on address in memory chips
- CNC machines
- Transmission from the computer system of a satellite
- Data bus control
- Computer memory