SN74BCT574N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74BCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 77MHz |
| Propagation Delay | 8.6 ns |
| Turn On Delay Time | 6.5 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8mA |
| Current - Output High, Low | 15mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 8.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5.5pF |
| Power Supply Current-Max (ICC) | 62mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 77000000Hz |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74BCT574N Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. The 74BCTseries comprises this type of FPGA. You should not exceed 77MHzin the output frequency of the device. The element count is 1 . There is a consumption of 8mAof quiescent energy. There have been 20 terminations. The 74BCT574 family contains it. It is powered from a supply voltage of 5V. Its input capacitance is 5.5pFfarads. A device of this type belongs to the family of BCT/FBT. It is mounted in the way of Through Hole. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part designed with 8bits is used in this application. 8 circuits are used to achieve its superior flexibility. The D latch runs on a voltage of 5V volts. The flip flop contains 2ports. Optimal efficiency requires a supply voltage of 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. There are no output lines on the JK flip flop.
SN74BCT574N Features
Tube package
74BCT series
20 pins
8 Bits
5V power supplies
SN74BCT574N Applications
There are a lot of Texas Instruments SN74BCT574N Flip Flops applications.
- Control circuits
- Guaranteed simultaneous switching noise level
- Frequency Dividers
- Safety Clamp
- Event Detectors
- Instrumentation
- Test & Measurement
- Common Clocks
- Automotive
- Data transfer