SN74AVCH4T245PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Current - Output | 12mA |
| Number of Bits | 4 |
| Propagation Delay | 2.9 ns |
| Turn On Delay Time | 10.3 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 6.3 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AVCH4T245PWG4 Overview
TSSOP contains it.This package has the format of Rail/Tube.Transmission lines are terminated using 16 terminations.A supply voltage of 1.5V powers it.Level translators is equipped wLevel translatorsh 16 pin count.Designed with 16 pins, it is compatible with a wide range of devices.An electronic part with 4 bits is designed.Supports a voltage of 3.6V as its maximum supply voltage.This device requires a minimum voltage of 1.2V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.This part is included in Bus Driver/Transceivers.In this case, the logic IC is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.In terms of electronic devices, this one is in the AVC family.Powered by a 1.5/3.3V battery, it can run for an extended period of time.In addition, it is characterized by TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B.The operating temperature should be higher than -40°C.Ideally, the operating temperature should be lower than 85°C.This device has a total of 2 elements.The output current of 12mA makes it feature maximum design flexibility.
SN74AVCH4T245PWG4 Features
TSSOP package
16 pin count
16 pins
1.5/3.3V power supplies
2 elements
SN74AVCH4T245PWG4 Applications
There are a lot of Texas Instruments SN74AVCH4T245PWG4 voltage translators & level shifters applications.
- Public Signage
- Extended Product-Change Notification
- MDIO
- Routers (routing equipment)
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Personal Electronics
- Electronic Points of Sale
- GPIO
- Extended Product-Change Notification
- Product Traceability