SN74AVCH20T245KR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Surface Mount | YES |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AVCH20T245 |
| Pin Count | 56 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 20 |
| Propagation Delay | 2.9 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 6.4 ns |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.2V~3.6V |
| Channels per Circuit | 10 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AVCH20T245KR Overview
Level translators is embedded in the 56-VFBGA package.Tape & Reel (TR) is the way in which it is packaged.In its configuration, Tri-State, Non-Inverted is used as the output.Its translator type is Voltage Level.Surface Mount is used to mount this electronic part.In this electrical device, the Channel type is Bidirectional.Level translators operates at -40°C~85°C TA.Its superior flexibility is achieved by using 2 circuits.Usually, when a transmission line is terminated, there are 56 termination points used.Parts related to a base part number 74AVCH20T245 are designated by the same number.A supply voltage of 1.5V is used to power the device.56 pins are present on this board.There are a number of devices in the 74AVCH series.The board has 56 pins.Electronic parts are designed with a number of bits of 20.Level translators supports the maximal supply voltage of 3.6V.With a minimum supply voltage of 1.2V, it operates.In the VCCA, the supply rail is set to 1.2V~3.6V.The VCCB supply rail is configured from 1.2V~3.6V.As part of Bus Driver/Transceivers, this part is included.There is a logic IC BUS TRANSCEIVER used in the system.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.In the world of electronics, this electronic device belongs to the family of AVC.A power supply of 1.5/3.3V is used to operate this machine.Based on its reliable performance, this device is suitable for TAPE AND REEL.
SN74AVCH20T245KR Features
56-VFBGA package
2 circuits
56 pin count
74AVCH series
56 pins
1.5/3.3V power supplies
SN74AVCH20T245KR Applications
There are a lot of Texas Instruments SN74AVCH20T245KR voltage translators & level shifters applications.
- Data and Clock Transmission Over Backplane
- Infotainment Head Unit
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- SDIO
- One Fabrication Site
- MDIO
- GPIO
- Desktop PC
- One Assembly and Test Site
- Product Traceability