SN74AUP1T158DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74AUP1T158 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Load Capacitance | 30pF |
| Propagation Delay | 10 ns |
| Family | AUP/ULP/V |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 2 |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Max I(ol) | 0.004 A |
| Number of Gates | 1 |
| Power Supply Current-Max (ICC) | 0.0009mA |
| Voltage Supply Source | Single Supply |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1T158DCKR Overview
In order to save board space, digital switch is located in the 6-TSSOP, SC-88, SOT-363.Tape & Reel (TR) represents its packaging.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sIn addition to being a member of the 74AUP series, these multiplexers have a wide range of applications.Among its basic features are 6 terminations.As its base part number is 74AUP1T158, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 2.5V.There are 6 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.A configuration of 6 pins is used.It is mounted in the way of Surface Mount.The AUP/ULP/V family includes the logic switch.The turn signal switch has 1 outputs.It has 2 inputs.According to TR, the switches is packaged.
SN74AUP1T158DCKR Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
SN74AUP1T158DCKR Applications
There are a lot of Texas Instruments SN74AUP1T158DCKR Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Combinational circuit
- Analog to digital conversion
- Signal router
- Data demultiplexing
- Code conversion
- Video transmission
- To select different devices in microprocessor input
- Telephone network
- Data bus control