SN74AUP1G79YFPR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Supply Voltage-Min (Vsup) | 0.8V |
| Load Capacitance | 30pF |
| Number of Bits | 1 |
| Clock Frequency | 266MHz |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 220000000Hz |
| Height | 500μm |
| Length | 1mm |
| Width | 1.4mm |
| Thickness | 500μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G79YFPR Overview
The item is packaged in 6-XFBGA, DSBGAcases. The package Tape & Reel (TR)contains it. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 0.8V~3.6V. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74AUP series. There should be no greater frequency than 266MHzon its output. It consumes 500nA of quiescent Currently, there are 6 terminations. The object belongs to the 74AUP1G79 family. It is powered from a supply voltage of 1.2V. A JK flip flop with a 1.5pFfarad input capacitance is used here. An electronic device belonging to the family AUP/ULP/Vcan be found here. The electronic part is mounted in the way of Surface Mount. It is designed with 6 pins. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. There are 1bits in this flip flop. For normal operation, the supply voltage (Vsup) should be kept above 0.8V. In view of its reliability, this D flip flop is a good fit for TR.
SN74AUP1G79YFPR Features
Tape & Reel (TR) package
74AUP series
6 pins
1 Bits
SN74AUP1G79YFPR Applications
There are a lot of Texas Instruments SN74AUP1G79YFPR Flip Flops applications.
- Data storage
- Modulo – n – counter
- ATE
- Parallel data storage
- Automotive
- Safety Clamp
- Bus hold
- Differential Individual
- Storage Registers
- Balanced 24 mA output drivers