SN74AUC2G66DCTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AUC2G66 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 10μA |
| Output Current | 50mA |
| Max Supply Current | 10μA |
| Throw Configuration | SPST |
| Propagation Delay | 400 ps |
| Turn On Delay Time | 2.3 ns |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Turn-Off Delay Time | 2 ns |
| -3db Bandwidth | 50MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 2.3ns, 2ns |
| Channel-to-Channel Matching (ΔRon) | 1 Ω (Max) |
| Crosstalk | -60dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 4ns |
| Voltage - Supply, Single (V+) | 0.8V~2.7V |
| Normal Position | NO |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC2G66DCTR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 8 terminations have occurred. A high-quality output is provided by the electrical component's 2 channels. Turning on and running the electrical part should be easy with a 1.1V voltage supply. 8 pins are injected to the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. Use 74AUC2G66 to search for variants of the digital switches. Analog switches have 15Ohm internal resistance. The datasheets for the 8 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 2.7V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. 800mV is the lowest voltage the electrical component should receive. The switch device would be able to operate with 10μA current. This analogue multiplexer requires a voltage of 0.8V~2.7V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 10μA. The data can be transferred over a wide range of bandwidths, called 500MHz bandwidths.
SN74AUC2G66DCTR Features
2 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 50MHz
Bandwidth: 500MHz
SN74AUC2G66DCTR Applications
There are a lot of Texas Instruments SN74AUC2G66DCTR Analog Switches & Multiplexers ICs applications.
- Automotive applications
- FTTH
- Power routing
- SDH
- Audio signal routing
- Avionics and Military Systems
- SONET
- Access Concentrators
- Digital access cross connects
- Data switching