SN74AUC1G19DCKR
| Parameters | |
|---|---|
| Prop. Delay@Nom-Sup | 3 ns |
| Voltage Supply Source | Single Supply |
| Number of Output Lines | 2 |
| Input Conditioning | STANDARD |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Base Part Number | 74AUC1G19 |
| Pin Count | 6 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Throw Configuration | SPDT |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.5 ns |
| Family | AUC |
| Logic Function | Decoder, Demultiplexer, Demux |
| Number of Inputs | 1 |
| Current - Output High, Low | 9mA 9mA |
| Supply Type | Single |
| Max I(ol) | 0.009 A |
SN74AUC1G19DCKR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 6-TSSOP, SC-88, SOT-363.It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 0.8V~2.7V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74AUC series, they can be used in a wide variety of applications.Among its basic features are 6 terminations.You can also find related parts by using its logic switch base part number of 74AUC1G19.The multiplexer is supplied with 1.1V voltage.This turn signal switch consists of 6 component pins.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.A total of 6 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the AUC family.There are 1 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 0.8V to avoid some unnecessary failures.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 10μA current of multiplexer ic.This multiplexer has a total of 1 inputs.The signal switching is packaged by TR. A signal source has 2 output lines.For the normal operation of the device, 1 circuits must be formed.
SN74AUC1G19DCKR Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
2 output lines
SN74AUC1G19DCKR Applications
There are a lot of Texas Instruments SN74AUC1G19DCKR Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- War field flying robot with a night vision flying camera
- Memory system of computers
- To select different devices in microprocessor input
- Robotic vehicles
- Injectors
- Textile mills
- Enabling block of memory depending on address in memory chips
- Data distribution
- CPU memory location identification