SN74AS194DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 7 ns |
| Family | AS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| Number of Output Lines | 4 |
| fmax-Min | 80 MHz |
| Max Frequency@Nom-Sup | 80000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AS194DRG4 Overview
There is an embedded device in the package SOIC. It sums up to 16 where the chip's terminations add up. Tape & Reel (TR) is the case in which it is packed. Voltage rating of the part is 5V. Devices with 16 pins are available. It is recommended to mount by Surface Mount. In this case, the electronic component belongs to the AS. A range of 5V is noted as the operating supply voltage of this chip. The following additional aspects of this section are worth noting: HOLD MODE. In this device, there are 6 input lines. A device capable of delivering voltage at 5V can be used. There are 4 bits in the IC chip. 16 pins are on it. Using it below 70°C is recommended. In order to operate the device, the value should not fall below 0°C. We use this supply voltage under 5.5V. Voltages higher than 4.5V are used for this supply. There are 4 output lines to operate. An electronic device such as this one has 1 circuits in it.
SN74AS194DRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 4 output lines
SN74AS194DRG4 Applications
There are a lot of Texas Instruments SN74AS194DRG4 Shift Registers applications.
- Counter
- LED matrix control
- Cache memory in CPU
- store data in digital form
- temporary data storage
- Flash Memory
- Serial-to-parallel data conversion
- Data Format Converters
- Data Processors
- Output expansion