SN74AS194DE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 12 ns |
| Family | AS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 53mA |
| Number of Input Lines | 6 |
| fmax-Min | 80 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AS194DE4 Overview
Embedded in a package of type SOIC, the device is available for use. 16 is the sum of the number of terminations in the chip. Voltage rating of the part is 5V. A total of 1 elements can be found on this part. 16 pins are provided on the device. Using Surface Mount as a mount point is recommended. Electronic components fall under the category of AS. This chip's operating supply voltage is reported as 5V. The following additional elements are important to note: HOLD MODE. This device has 6 input lines available. It has a total of zero pins. A temperature below 70°C is recommended for its use. It should not be lower than 0°C to operate this device. 5.5V is the supply voltage used. It is important to note that this supply voltage is higher than 4.5V.
SN74AS194DE4 Features
With 16 pins
Operate supply voltage at 5V
SN74AS194DE4 Applications
There are a lot of Texas Instruments SN74AS194DE4 Shift Registers applications.
- Data Format Converters
- Data manipulation
- Parallel to serial converter
- Pattern Recognizers
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- LED matrix control
- Flash Memory