SN74AS174N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74AS174 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 3.6 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 2mA 20mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 45mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS174N Overview
16-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Through Holeis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of 0°C~70°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74ASseries of FPGAs. You should not exceed 100MHzin its output frequency. There are 1 elements in it. As a result, it consumes 45mA quiescent current and is not affected by external forces. The number of terminations is 16. The 74AS174 family contains it. A voltage of 5V is used as the power supply for this D latch. In this case, the D flip flop belongs to the ASfamily. There is an electronic part mounted in the way of Through Hole. This board has 16 pins. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. The superior flexibility of this product is achieved by using 7 circuits. If high efficiency is desired, the supply voltage should be kept at 5V. With an output current of 20mA, this device offers maximum design flexibility. It operates with 2 output lines. It is reported that there are 3 input lines.
SN74AS174N Features
Tube package
74AS series
16 pins
SN74AS174N Applications
There are a lot of Texas Instruments SN74AS174N Flip Flops applications.
- Registers
- Data Synchronizers
- Automotive
- Load Control
- Clock pulse
- Supports Live Insertion
- Pattern generators
- Latch-up performance
- Parallel data storage
- Matched Rise and Fall