SN74ALVCH16820DL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH16820 |
| JESD-30 Code | R-PDSO-G56 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | ALVC/VCX/A |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 4.8ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 5.9 ns |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVCH16820DL Overview
In the form of 56-BSSOP (0.295, 7.50mm Width), it has been packaged. D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74ALVCH series. Its output frequency should not exceed 150MHz Hz. In total, it contains 1 elements. There is 40μA quiescent consumption. There are 56 terminations,If you search by 74ALVCH16820, you will find similar parts. Power is supplied from a voltage of 1.8V volts. There is 3.5pF input capacitance for this T flip flop. It is a member of the ALVC/VCX/Afamily of D flip flop. The part you are looking for is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 3.6V. It operates from 3.3V power supplies. The D flip flop has no ports embedded.
SN74ALVCH16820DL Features
Tube package
74ALVCH series
3.3V power supplies
SN74ALVCH16820DL Applications
There are a lot of Texas Instruments SN74ALVCH16820DL Flip Flops applications.
- Instrumentation
- Storage registers
- Latch-up performance
- Bounce elimination switch
- 2 – Bit synchronous counter
- Storage Registers
- High Performance Logic for test systems
- EMI reduction circuitry
- Clock pulse
- Shift Registers