SN74ALS874BNT
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH CLEAR |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Clock Frequency | 30MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 21mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS874BNT Overview
As a result, it is packaged as 24-DIP (0.300, 7.62mm). The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is 0°C~70°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74ALSseries of FPGAs. You should not exceed 30MHzin its output frequency. In total, there are 2 elements. As a result, it consumes 21mA quiescent current and is not affected by external forces. A total of 24 terminations have been made. A voltage of 5V is used to power it. It is a member of the ALSfamily of D flip flop. It is part of the FF/Latchesbase part number family. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. Furthermore, it has WITH CLEARas a characteristic.
SN74ALS874BNT Features
Tube package
74ALS series
5V power supplies
SN74ALS874BNT Applications
There are a lot of Rochester Electronics, LLC SN74ALS874BNT Flip Flops applications.
- Safety Clamp
- Event Detectors
- Synchronous counter
- Automotive
- Divide a clock signal by 2 or 4
- Functionally equivalent to the MC10/100EL29
- Modulo – n – counter
- QML qualified product
- Circuit Design
- Storage registers