SN74ALS299DWG4
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 25 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 30 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
SN74ALS299DWG4 Overview
SOIC is the package in which the device is embedded. There are 20 terminations on the chip. Presented in a case of Rail/Tube. The part's operating supply voltage is rated 5V. It has 20 pins. Surface Mount is recommended for mounting. There is an electronic component in the ALS. A range of 5V is noted as the operating supply voltage of this chip. This section has the following additional features: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. As far as the device is concerned, there are 10 input lines available. There is a possibility of delivering voltage at 5V. It has 8 bits in total. It has a total of 20 pins. At temperatures below 70°C, it is recommended for use. In order for this device to function, the value should not be less than 0°C. It is employed under the condition of 5.5V. It is important to note that this supply voltage is higher than 4.5V. This device has 1 circuits.
SN74ALS299DWG4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS299DWG4 Applications
There are a lot of Texas Instruments SN74ALS299DWG4 Shift Registers applications.
- temporary data storage
- LED matrix control
- Counter
- Pattern Recognizers
- Cache memory in CPU
- Pulse Extenders
- store data in digital form
- ROM Chips
- Pseudo Random Pattern Generator
- Dual-rank shift, hold, and bus applications