SN74ALS174DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS174DRG4 Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is included in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of 0°C~70°C TAis used in the operation. A flip flop of this type is classified as a D-Type. It belongs to the 74ALSseries of FPGAs. Its output frequency should not exceed 50MHz Hz. In total, it contains 1 elements. It consumes 19mA of quiescent current without being affected by external factors. It has been determined that there have been 16 terminations. Members of the 74ALS174family make up this object. A voltage of 5V is used to power it. ALSis the family of this D flip flop. Surface Mount mounts this electronic component. The 16pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. Using 7 circuits, it is highly flexible. On the basis of its reliable performance, this D flip flop is well suited for use with TR. A power supply of 5Vis required to operate it. High efficiency requires the supply voltage to be maintained at 5V. Its output current of 8mAallows for maximum design flexibility. There are 2 output lines on it. It is reported that there are 3 input lines.
SN74ALS174DRG4 Features
Tape & Reel (TR) package
74ALS series
16 pins
5V power supplies
SN74ALS174DRG4 Applications
There are a lot of Texas Instruments SN74ALS174DRG4 Flip Flops applications.
- Set-reset capability
- Latch-up performance
- Frequency division
- Computing
- Test & Measurement
- Individual Asynchronous Resets
- High Performance Logic for test systems
- Communications
- Matched Rise and Fall
- Storage registers