SN74ALS166NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 14 ns |
| Family | ALS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 45 MHz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS166NSRG4 Overview
There is a SOP package embedded with the device. 16 is the sum of the number of terminations in the chip. The case Tape & Reel (TR) contains it. There is 5V operating supply voltage listed on the part. A total of 1 elements can be found on this part. The device is equipped with 16 pins. As a general recommendation, mounting by Surface Mount is recommended. In this case, the electronic component belongs to the ALS. According to the specification, this chip's operating supply voltage falls within the range of 5V. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. Voltage can be delivered at 5V. There are 8 bits in the IC chip. This board has 16 pins in total. Temperatures below 70°C are recommended for use. For this device to operate, it cannot be lower than 0°C. A voltage of 5.5V is used to supply this voltage. Voltages higher than 4.5V are used for this supply. There is a subcategory of it called Shift Registers.
SN74ALS166NSRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS166NSRG4 Applications
There are a lot of Texas Instruments SN74ALS166NSRG4 Shift Registers applications.
- ROM Chips
- Interconnectors
- temporary data storage
- Flash Memory
- Pulse Extenders
- Parallel to serial converter
- data manipulation
- Pattern Recognizers
- Serial-to-parallel data conversion
- Data Format Converters