SN74ALS166NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.005886mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 14 ns |
| Family | ALS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 45 MHz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS166NSRE4 Overview
Embedded in a package of type SOP, the device is available for use. This chip has a total termination count of 16. It is packed in a case number Tape & Reel (TR). 5V is the part's operating supply voltage. On this part, there are 1 elements. It has 16 pins. The mounting method should be Surface Mount. In the ALS series, the electronic component belongs. A range of 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: SISO OPERATION ALSO AVAILABLE. In the device, there are 9 input lines that are available for use. A voltage of 5V can be delivered by it. The total number of IC chip bits is 8. There are a total of 16 pins on it. Under temperatures below 70°C, it is recommended to use it. For this device to operate, it cannot be lower than 0°C. A voltage of this type is employed under 5.5V. It is used at a voltage greater than 4.5V. There is a subcategory of it called Shift Registers.
SN74ALS166NSRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS166NSRE4 Applications
There are a lot of Texas Instruments SN74ALS166NSRE4 Shift Registers applications.
- Cache memory in CPU
- Delay Line
- Pulse Extenders
- LED matrix control
- Serial-to-parallel data conversion
- Remote control holding register
- Serial to parallel converter
- Counter
- Sequence generator
- Remote control holding register