SN74ALS166NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 949.99252mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 14 ns |
| Family | ALS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 24mA |
| Number of Input Lines | 9 |
| fmax-Min | 45 MHz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS166NE4 Overview
PDIP is the package in which the device is embedded. It sums up to 16 where the chip's terminations add up. The part operates at 5V voltage. This part has 1 elements. It is equipped with a pin count of 16. It is recommended that the mount should be done by Through Hole. This electronic component is classified as ALS. It is noted that the operating supply voltage of this chip falls within the range 5V. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. As far as the device is concerned, there are 9 input lines available. The total number of IC chip bits is 8. It has a total of 16 pins. It should be used below 70°C. This device should not be operated below 0°C. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 4.5V. Shift Registers is its subcategory.
SN74ALS166NE4 Features
With 16 pins
Operate supply voltage at 5V
SN74ALS166NE4 Applications
There are a lot of Texas Instruments SN74ALS166NE4 Shift Registers applications.
- Output expansion
- Interconnectors
- Serial to parallel converter
- data manipulation
- Remote control holding register
- Parallel data
- Pulse Extenders
- Data Format Converters
- store data in digital form
- Data Processors