SN74ALS166N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 45MHz |
| Base Part Number | 74ALS166 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Load Capacitance | 50pF |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 14 ns |
| Family | ALS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 24mA |
| Number of Output Lines | 3 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS166N Overview
As a result, 16-DIP (0.300, 7.62mm) package contains the embedded device. A total of 16 terminations can be found on the chip. Presented in a case of Tube. 5V is the operating supply voltage of the part. There are 1 elements on this part. Devices with 16 pins are available. Through Hole is recommended for mounting. In this case, the electronic component belongs to the ALS. Mounted in the same way as Through Hole. There is a temperature range of 0°C~70°C. Votage is supplied within 4.5V~5.5V. In this case, the electrical component belongs to the series 74ALS. If you use the 74ALS166 family, you can find parts that are similar. This chip's operating supply voltage is reported as 5V. Additionally, this section contains the following: SISO OPERATION ALSO AVAILABLE. It is necessary to operate 3 output lines of the system. Its frequency is set to 45MHz.
SN74ALS166N Features
With 16 pins
Mounted in Through Hole type.
Based on 74ALS166 family
Operate supply voltage at 5V
With 3 output lines
SN74ALS166N Applications
There are a lot of Texas Instruments SN74ALS166N Shift Registers applications.
- Parallel data
- Remote control holding register
- Data Format Converters
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Data Processors
- Interconnectors
- 7-segment display control
- data manipulation
- Output expansion