SN74ALS166DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 14 ns |
| Family | ALS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 45 MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS166DBRG4 Overview
In package SSOP, there is an embedded device. 16 is the number of terminations on the chip. There is a Tape & Reel (TR) case containing it. Its operating supply voltage is rated at 5V. On this part, there are 1 elements. 16 pins are located on the device. Surface Mount is recommended for mounting. This electronic component is classified as ALS. In terms of supply voltage, this chip operates within the range of 5V. Additional aspects of this section include: SISO OPERATION ALSO AVAILABLE. The device has a total of 9 input lines. Voltage can be delivered at 5V. There are 8 bits in the IC chip. It has a total of zero pins. Temperatures below 70°C are recommended for use. This device should not be operated below 0°C. This supply voltage is employed under 5.5V. Voltages higher than 4.5V are used for this supply. In its subcategory, it is listed under Shift Registers.
SN74ALS166DBRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS166DBRG4 Applications
There are a lot of Texas Instruments SN74ALS166DBRG4 Shift Registers applications.
- temporary data storage
- data manipulation
- Pseudo Random Pattern Generator
- Remote control holding register
- Delay Line
- Parallel to serial converter
- Counter
- ROM Chips
- Data Format Converters
- Pattern Recognizers