SN74ALS166DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 14 ns |
| Family | ALS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS166DBRE4 Overview
There is an embedded device in the package SSOP. 16 is the sum of the number of terminations in the chip. Tape & Reel (TR) is the case in which it is packed. There is 5V operating supply voltage listed on the part. This part has 1 elements. The device is equipped with 16 pins. It is recommended that the mount should be done by Surface Mount. It is a component of the ALS. This chip's operating supply voltage is reported as 5V. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. The device has 9 input lines. A device capable of delivering voltage at 5V can be used. IC chip bits total 8. 16 pins are present on it. Using it below 70°C is recommended. This device should not be operated below 0°C. It is used under the 5.5V supply voltage. A voltage higher than 4.5V is used as a supply voltage. The subcategory in which it falls belongs to is Shift Registers.
SN74ALS166DBRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS166DBRE4 Applications
There are a lot of Texas Instruments SN74ALS166DBRE4 Shift Registers applications.
- Data Processors
- LED matrix control
- temporary data storage
- Parallel data
- Serial to parallel converter
- data transfer
- Dual-rank shift, hold, and bus applications
- Sequence generator
- 8-bit data storage
- Remote control holding register