SN74ALS165N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CLOCK INHIBIT |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 45MHz |
| Base Part Number | 74ALS165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 22 ns |
| Family | ALS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 24mA |
| Number of Input Lines | 9 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS165N Overview
16-DIP (0.300, 7.62mm) package contains the device. 16 is the sum of the number of terminations in the chip. It is used to pack in Tube case. Parts with a 5V operating supply voltage are specified. There are 1 elements on this part. There are 16 pins on the device. It is recommended to mount by Through Hole. An electronic component is included in the ALS. Through Hole is the way in which this component is mounted. There is a range of operating temperatures 0°C~70°C. Votage is supplied within 4.5V~5.5V. This electrical component belongs to the 74ALS series. Similar parts can be found by searching for the 74ALS165 family. The operating supply voltage of this chip is noted to be within the range 5V. This section has the following additional features: CLOCK INHIBIT. The device has a total of 9 input lines. Voltage can be delivered at 5V. Its frequency is set to 45MHz.
SN74ALS165N Features
With 16 pins
Mounted in Through Hole type.
Based on 74ALS165 family
Operate supply voltage at 5V
It supplies 5V power
SN74ALS165N Applications
There are a lot of Texas Instruments SN74ALS165N Shift Registers applications.
- Serial-to-parallel data conversion
- Sequence generator
- Remote control holding register
- Parallel to serial converter
- temporary data storage
- Data manipulation
- Pulse Extenders
- Serial-to-parallel data conversion
- Serial to parallel converter
- Interconnectors