SN74ALS164ANSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 210.013267mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | AND-GATED SERIAL (A AND B) INPUTS |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 11 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Number of Output Lines | 8 |
| fmax-Min | 75 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS164ANSRE4 Overview
SOIC is a package containing the embedded device. This chip has a total termination count of 14. Presented in a case of Tape & Reel (TR). Parts with a 5V operating supply voltage are specified. Devices with 14 pins are available. Using Surface Mount as a mount point is recommended. In the ALS series, the electronic component belongs. In terms of supply voltage, this chip operates within the range of 5V. There are also the following additional considerations in this section: AND-GATED SERIAL (A AND B) INPUTS. This device has 2 input lines available. Voltage can be delivered at 5V. It has a total of 8 pins. This board has 14 pins in total. Temperatures below 70°C are recommended for use. For this device to work, it should not go below 0°C. A voltage of 5.5V is used to supply this voltage. It is used at a higher voltage than 4.5V. It is necessary to operate 8 output lines of the system. 1 circuits are present in this device.
SN74ALS164ANSRE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 5V power
With 8 output lines
SN74ALS164ANSRE4 Applications
There are a lot of Texas Instruments SN74ALS164ANSRE4 Shift Registers applications.
- data manipulation
- Delay Line
- Output expansion
- Remote control holding register
- Flash Memory
- Pulse Extenders
- Serial to parallel converter
- Pseudo Random Pattern Generator
- Data Format Converters
- LED matrix control