SN74ALS164ADE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | AND-GATED SERIAL (A AND B) INPUTS |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 20 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| fmax-Min | 50 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS164ADE4 Overview
In package SOIC, there is an embedded device. 14 is the number of terminations on the chip. Parts with a 5V operating supply voltage are specified. A total of 1 elements can be found on this part. 14 pins are located on the device. It is recommended to mount by Surface Mount. In this case, the electronic component belongs to the ALS. It is noted that this chip uses an operating supply voltage of 5V. The following additional elements are important to note: AND-GATED SERIAL (A AND B) INPUTS. The device has a total of 2 input lines. A device capable of delivering voltage at 5V can be used. This board has 14 pins in total. This product should not be used at temperatures above 70°C. This device should not be operated with a value lower than 0°C. 5.5V is the supply voltage used. This supply voltage is employed higher than 4.5V.
SN74ALS164ADE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS164ADE4 Applications
There are a lot of Texas Instruments SN74ALS164ADE4 Shift Registers applications.
- Serial-to-parallel data conversion
- Data Format Converters
- data manipulation
- Remote control holding register
- Pulse Extenders
- Pattern Recognizers
- data transfer
- Dual-rank shift, hold, and bus applications
- store data in digital form
- Counter