SN74AHCT595PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT595PWRE4 Overview
TSSOP is a package containing the embedded device. There are 16 terminations on the chip. It is packed in a case number Tape and Reel. The part's operating supply voltage is rated 5V. 1 elements are present in this part. 16 pins are available on the device. It is recommended to mount by Surface Mount in order to get the best results. This electronic component is classified as AHCT/VHCT/VT. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A voltage of 5V can be delivered by it. There are 8 bits in the IC chip. In total, it has 16 pins. A temperature below 85°C is recommended for its use. It should not be less than -40°C when operating this device. It is employed under the condition of 5.5V. The supply voltage is higher than 4.5V. Operating on 9 output lines is possible.
SN74AHCT595PWRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595PWRE4 Applications
There are a lot of Texas Instruments SN74AHCT595PWRE4 Shift Registers applications.
- Sequence generator
- Serial-to-parallel data conversion
- Interconnectors
- data transfer
- Dual-rank shift, hold, and bus applications
- 8-bit data storage
- Data Processors
- data manipulation
- 7-segment display control
- Flash Memory