SN74AHCT595PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 170MHz |
| Base Part Number | 74AHCT595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Input Current | 1μA |
| Number of Output Lines | 9 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT595PW Overview
Embedded in a package of type 16-TSSOP (0.173, 4.40mm Width), the device is available for use. There are 16 terminations on the chip. The Tube case contains it. Voltage rating of the part is 5V. 16 pins are located on the device. It is recommended to mount by Surface Mount. There is an electronic component in the AHCT/VHCT/VT. Mounted in the same way as Surface Mount. There is a range of temperatures -40°C~85°C for operation. The voltage supplied to it is within the range of 4.5V~5.5V. 74AHCT is the series number of this electrical component. Based on the 74AHCT595 family, you can search for similar parts. It is noted that this chip uses an operating supply voltage of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The device has 1 input lines. A voltage of 5V is possible with this device. There are 9 output lines to operate. Frequency 170MHz is used by the device.
SN74AHCT595PW Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHCT595 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595PW Applications
There are a lot of Texas Instruments SN74AHCT595PW Shift Registers applications.
- Interconnectors
- Pseudo Random Pattern Generator
- Data Processors
- temporary data storage
- 7-segment display control
- Serial to parallel converter
- Cache memory in CPU
- Data manipulation
- ROM Chips
- Pattern Recognizers