SN74AHCT595NE4
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 9 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
SN74AHCT595NE4 Overview
PDIP is the package in which the device is embedded. It sums up to 16 where the chip's terminations add up. It is packed in a case number Rail/Tube. 5V is the part's operating supply voltage. It is a part that has 1 elements on it. There are 16 pins on the device. Through Hole is recommended for mounting. Electronic components belong to the AHCT/VHCT/VT group. In terms of supply voltage, this chip operates within the range of 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. Devices with voltage delivery capabilities of 5V are available. IC chips contain a total of 8 bits. It has a total of 16 pins. Under temperatures below 85°C, it is recommended to use it. In order for this device to function, the value should not be less than -40°C. Under 5.5V, this voltage is employed. Voltages higher than 4.5V are used for this supply. 9 output lines are available for operation.
SN74AHCT595NE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595NE4 Applications
There are a lot of Texas Instruments SN74AHCT595NE4 Shift Registers applications.
- Remote control holding register
- temporary data storage
- Sequence generator
- Pulse Extenders
- Dual-rank shift, hold, and bus applications
- Cache memory in CPU
- Parallel data
- Serial to parallel converter
- data transfer
- Parallel to serial converter