SN74AHCT595N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 115MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Input Current | 40μA |
| Number of Output Lines | 9 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT595N Overview
There is an embedded device in the package 16-DIP (0.300, 7.62mm). There are 16 terminations on the chip. A Tube case holds it. 5V is the part's operating supply voltage. In this device, there are 16 pins. The mounting method should be Through Hole. Electronic components belong to the AHCT/VHCT/VT group. This component is mounted in the way of Through Hole. The operating temperature ranges -40°C~85°C. There is a voltage supply within 4.5V~5.5V. 74AHCT is the series number of this electrical component. You can search for similar parts based on the 74AHCT595 family. This chip's operating supply voltage is reported as 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. 1 input lines are available on the device. A voltage of 5V can be delivered by it. The number of output lines to be operated is 9. The device runs its frequency at 115MHz.
SN74AHCT595N Features
With 16 pins
Mounted in Through Hole type.
Based on 74AHCT595 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595N Applications
There are a lot of Texas Instruments SN74AHCT595N Shift Registers applications.
- Data manipulation
- data transfer
- Cache memory in CPU
- Pattern Recognizers
- Parallel data
- Flash Memory
- Output expansion
- Serial to parallel converter
- LED matrix control
- Remote control holding register