SN74AHCT595DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT595DG4 Overview
There is a SOIC package embedded with the device. 16 is the total number of terminations on the chip. It is packed in a case number Rail/Tube. 5V is the part's operating supply voltage. This part has 1 elements. It is equipped with a pin count of 16. Mounting by Surface Mount is recommended. Electronic components are categorized as AHCT/VHCT/VT. A range of 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. It can deliver voltage at 5V. IC chips contain a total of 8 bits. In total, it has 16 pins. Using it below 85°C is recommended. This device should not be operated below -40°C. 5.5V is the supply voltage used. There is a voltage applied to the supply that is greater than 4.5V. There are 9 output lines to operate.
SN74AHCT595DG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595DG4 Applications
There are a lot of Texas Instruments SN74AHCT595DG4 Shift Registers applications.
- Output expansion
- Remote control holding register
- Data Format Converters
- Pseudo Random Pattern Generator
- Pulse Extenders
- data manipulation
- Delay Line
- data transfer
- Sequence generator
- 7-segment display control