SN74AHCT594PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT594PWRE4 Overview
As a result, TSSOP package contains the embedded device. 16 is the sum of the number of terminations in the chip. A Tape & Reel (TR) case is used to pack it. Voltage rating of the part is 5V. On this part, there are 1 elements. 16 pins are located on the device. Surface Mount is recommended for mounting. It is a component of the AHCT/VHCT/VT. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED. A voltage of 5V is possible with this device. A total of 8 bits are present on the IC chip. This board has 16 pins in total. Temperatures below 85°C are recommended for use. In order to operate the device, the value should not fall below -40°C. It is used under the 5.5V supply voltage. There is a voltage applied to the supply that is greater than 4.5V. The number of output lines to be operated is 9.
SN74AHCT594PWRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594PWRE4 Applications
There are a lot of Texas Instruments SN74AHCT594PWRE4 Shift Registers applications.
- Generate time delay toward digital circuits
- 7-segment display control
- Serial to parallel converter
- Flash Memory
- Data manipulation
- store data in digital form
- data manipulation
- Remote control holding register
- LED matrix control
- Parallel to serial converter