SN74AHCT594NSRE4
| Parameters | |
|---|---|
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.005886mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
SN74AHCT594NSRE4 Overview
As a result, SOP package contains the embedded device. 16 is the sum of the number of terminations in the chip. The Tape & Reel (TR) case contains it. Voltage rating of the part is 5V. A total of 1 elements are present on this part. There are 16 pins on the device. Surface Mount is recommended for mounting. There is an electronic component in the AHCT/VHCT/VT. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED. Devices with voltage delivery capabilities of 5V are available. The total number of IC chip bits is 8. It has a total of zero pins. The product should be used at temperatures below 85°C. In order for this device to function, the value should not be less than -40°C. This supply voltage is employed under 5.5V. This supply voltage is employed higher than 4.5V. 9 output lines are available for operation.
SN74AHCT594NSRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594NSRE4 Applications
There are a lot of Texas Instruments SN74AHCT594NSRE4 Shift Registers applications.
- ROM Chips
- Remote control holding register
- Parallel to serial converter
- Delay Line
- data manipulation
- temporary data storage
- data transfer
- Cache memory in CPU
- Interconnectors
- Output expansion