SN74AHCT594DRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT594DRE4 Overview
There is a SOIC package embedded with the device. This chip has a total termination count of 16. Presented in a case of Tape & Reel (TR). The part's operating supply voltage is rated 5V. 1 elements are present in this part. 16 pins are available on the device. Surface Mount is recommended for mounting. In the AHCT/VHCT/VT series, the electronic component belongs. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED. The device is capable of delivering voltage at 5V. A total of 8 bits are present on an IC chip. In total, there are 16 pins on it. It is recommended that it be used at temperatures below 85°C. Ideally, it should not fall below -40°C. A voltage of 5.5V is employed as the supply voltage. Voltages higher than 4.5V are used for this supply. It is necessary to operate 9 output lines.
SN74AHCT594DRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594DRE4 Applications
There are a lot of Texas Instruments SN74AHCT594DRE4 Shift Registers applications.
- 8-bit data storage
- Data Format Converters
- Flash Memory
- Pattern Recognizers
- Data manipulation
- data transfer
- 7-segment display control
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Pulse Extenders