SN74AHCT594DG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT594DG4 Overview
The device is embedded in 16-SOIC (0.154, 3.90mm Width) package. This chip has a total termination count of 16. Presented in a case of Tube. A voltage of 5V is specified for the part's operating supply. The device is equipped with 16 pins. The mounting method should be Surface Mount. Electronic components fall under the category of AHCT/VHCT/VT. There is a component mounted in the way of Surface Mount on this board. A temperature range of -40°C~85°C is used for operation. It is supplied with voltage within 4.5V~5.5V. It is part of the 74AHCT series of electrical components. A 74AHCT594 family can be used to search for similar parts. According to the specification, this chip's operating supply voltage falls within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED. The device has 1 input lines. Devices with voltage delivery capabilities of 5V are available. A total of 9 output lines are available for operation.
SN74AHCT594DG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHCT594 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594DG4 Applications
There are a lot of Texas Instruments SN74AHCT594DG4 Shift Registers applications.
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Data manipulation
- temporary data storage
- Data Processors
- Remote control holding register
- Cache memory in CPU
- Pattern Recognizers
- Interconnectors
- Counter