SN74AHCT594DBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT594 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT594DBR Overview
Embedded in a package of type 16-SSOP (0.209, 5.30mm Width), the device is available for use. 16 is the total number of terminations on the chip. A Cut Tape (CT) case is used to pack it. Voltage rating of the part is 5V. 16 pins are present on the device. It is recommended that the mount should be done by Surface Mount. Electronic components belong to the AHCT/VHCT/VT group. There is a component mounted in the way of Surface Mount on this board. A temperature range of -40°C~85°C is used for operation. During operation, the voltage is within the range of 4.5V~5.5V. The 74AHCT series contains this electrical component. Similar parts can be found using the 74AHCT594 family. In terms of supply voltage, this chip operates within the range of 5V. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED. In this device, there are 1 input lines. Voltage can be delivered at 5V by the device. It is necessary to operate 9 output lines of the system. The part is packaged in the way of TR.
SN74AHCT594DBR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHCT594 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
Packing Method : TR
SN74AHCT594DBR Applications
There are a lot of Texas Instruments SN74AHCT594DBR Shift Registers applications.
- Data Format Converters
- Serial-to-parallel data conversion
- Pattern Recognizers
- data transfer
- ROM Chips
- Parallel data
- Serial to parallel converter
- Counter
- store data in digital form
- LED matrix control