SN74AHCT573PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT573PWR Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. A package of Cut Tape (CT) has been used. It is configured with an output of Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations that have been designed. This type belongs to the 74AHCT573 family. With a supply voltage of 5V, it operates. There are 20 pins on it. It is a member of the AHCT/VHCT/VT family of electronic devices. There are 20 pins on it. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. There is 5V power supply for it. Electronic circuits are represented by 3 input lines. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 8mA output current. High efficiency requires a supply voltage of 5V. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. 8 circuits enable it to achieve high performance. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.
SN74AHCT573PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573PWR Applications
There are a lot of Texas Instruments SN74AHCT573PWR Latches applications.
- Serial Input
- Meter applications
- Motor Drives
- Automotive Infotainment
- Four-bit storage with output enable
- Pseudo-random code generators
- Counters
- Storage
- Phase comparator
- General-Purpose Register