SN74AHCT573DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT573DGVR Overview
A package called 20-TFSOP (0.173, 4.40mm Width) contains it. Cut Tape (CT) is the way in which it is packaged. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. There is no supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74AHCT series of FPGAs is the one this FPGA belongs to. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. As a member of the 74AHCT573 family, it falls under that category. The device is operated when the supply voltage is set to 5V. 20 pins are provided. It is a member of the AHCT/VHCT/VT family of electronic devices. There are 20 pins on it. Surface Mount is used to mount this electronic part. This device has 2 ports. It belongs to the subcategory of FF/Latches. There is 5V power supply for it. It consists of 3 input lines from which an electronic circuit can be built. The device's reliable performance makes it a good choice for TR. With 8mA, maximum design flexibility is ensured. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A maximal power current (ICC) is generated for its operation at 0.04mA.
SN74AHCT573DGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573DGVR Applications
There are a lot of Texas Instruments SN74AHCT573DGVR Latches applications.
- Instrumentation
- Counting
- Programmable binary
- Hammer
- Digital bus buffer
- Counter timers
- Display driver
- Parallel data storage
- Decade counting 7-segment decimal display
- Stacked or Push-Down Registers