SN74AHCT373PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT373PWRG4 Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) is the way in which it is packaged. It is configured with an output of Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. There are a number of FPGAs in this series, including this one. The electronic part in this image has 8 bits. In this device, there are 20 terminations that have been designed. The family 74AHCT373 includes it. With a supply voltage of 5V, it operates. It has 20 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of AHCT/VHCT/VT. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. The system is powered by 5V sources. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The device's reliable performance makes it a good choice for TR. As the output current is 8mA, the design flexibility is maximum. High efficiency requires a voltage supply of 5V.
SN74AHCT373PWRG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies
SN74AHCT373PWRG4 Applications
There are a lot of Texas Instruments SN74AHCT373PWRG4 Latches applications.
- Counters
- Phase comparator
- Storage
- Meter applications
- Pattern generators
- Automotive Cluster
- Watches
- Motor Drives
- Buffer Storage
- PCs and Notebooks